Go to Settings > WiFi > tap on your WiFi Network. 2. On the next screen, scroll down to “IPV4 ADDRESS” section and note down the IP Address of Router. Also, note down the Subnet Mask Address and the last number set of current IP Address (12 in above case). 3. An IP address is assigned to a device when it connects to a network (using DHCP) by the network (I’m ignoring self assigned IP addresses). Connect to a different network, and you’ll (probably) get assigned a difference IP address. Hotspot set your phone to act as a router. It uses the same address for its connection to the internet, but To find your router's IP address, open the Command Prompt and type ipconfig. Press Enter. Find your router's IP address next to Default Gateway. Or, head to the Control Panel > Network and Internet and select View network status and tasks. Select your connection icon > Details. Find your router's IP address next to IPv4 Default Gateway. To update the IP address information, contact each third party database directly. Check the information for each database – IP2Location, IPData, and MaxMind – and contact them accordingly. After the information is corrected, WhatIsMyIP.com will show the updated information after about a month. Check back with the IP Lookup Tool to confirm Open the “Settings” app on your iPhone. 2. Scroll down and tap on “Mobile Data” (or “Cellular” in some cases). 3. On the Mobile Data/Cellular page, you will find various settings and information related to your mobile data connection. 4. Look for the section called “IP Address” or “IP Settings.”. 5. Open the Settings app on your iPhone. Tap on Wi-Fi, located near the top of the settings menu. Find your connected Wi-Fi network in the list and tap on the “i” icon next to it. Scroll down, and you will see the “IP Address” field under the “IPv4 Address” section. The value displayed here is your local IP address. And you can quickly identify the IP address of your security camera with the unique MAC address of the camera. For example, you may easily find the Reolink camera addresses via the following steps: Step 1. Enter the gateway IP address of the router. Step 2. Check the IP camera MAC address via the camera software. Step 3. Connect your computer to the CPE's Wi-Fi (or to the CPE's LAN port using an Ethernet cable). Enter 192.168.8.1 in the address box of the browser, and enter the login password to access the management page of the CPE. Go to Advanced > Router > DHCP. In the LAN IP address field, enter the new IP address, and click Save. Note that if the default IP address of your router conflicts with the IP address of another device on the network, your router will modify its IP address automatically. Connect your computer/phone to the router's Wi-Fi（check the nameplate at the bottom of the router for the default Wi-Fi name, no password) , or connect the computer to the 0jXd.

how do i change my phone ip address